Netgear M4300-48X (XSM4348CS) - Stackable Switches with Full PoE+ Provisioning ユーザーズマニュアル

Select the Interface.

In the Sampling Interval field, enter the interval at which EEE LPI data is collected. 

This is a global setting and is applied to all interfaces. The range is 30 to 36000.The 
default value is 3600. 

In the Max Samples To Keep field, enter the maximum number of samples to keep.

This is a global setting and is applied to all interfaces. The range is 1 to 168.The default 
value is 168. 

Click the Apply button.

The updated configuration is sent to the switch. Configuration changes take effect 
immediately.

The following table describes the nonconfigurable fields.

You can configure settings for DHCP server, DHCP pools, DHCP bindings, and DHCP relay. 
You can also view DHCP statistics and conflicts.



Launch a web browser.

Enter http://<ipaddress> in the web browser address field.

The login window opens.

Enter the user name and password. 

Percentage LPI time per switch

Time spent in LPI mode per switch since EEE counters were last 
cleared.

Sample No.

Sample index.

Time Since The Sample Was 
Recorded

Each time the page is refreshed, it shows a different time as it reflects 
the difference in current time and time at which the sample was 
recorded.

Percentage Time spent in LPI 
mode since last sample

Percentage of time spent in LPI mode during the current measurement 
interval. 

Percentage Time spent in LPI 
mode since last reset

Percentage of time spent in LPI mode since EEE LPI statistics were 
reset.