Netgear M4300-48X (XSM4348CS) - Stackable Switches with Full PoE+ Provisioning ソフトウェアガイド
![Netgear](https://files.manualsbrain.com/attachments/cf1ad5de25a3f8d6c88ef0ab489c1b137eebe11f/common/fit/150/50/17742d1e0cdacf24edeb88c30757620088415c5f7699f69b4517262e21e0/brand_logo.jpeg)
IPv6 Multicast Commands
1034
M4200 and M4300 Series ProSAFE Managed Switches
IPv6 PIM Commands
This section describes the commands you use to configure Protocol Independent Multicast
-Dense Mode (PIM-DM) and Protocol Independent Multicast - Sparse Mode (PIM-SM) for
IPv6 multicast routing. PIM-DM and PIM-SM are multicast routing protocols that provides
scalable inter-domain multicast routing across the Internet, independent of the mechanisms
provided by any particular unicast routing protocol. Only one PIM mode can be operational at
a time.
-Dense Mode (PIM-DM) and Protocol Independent Multicast - Sparse Mode (PIM-SM) for
IPv6 multicast routing. PIM-DM and PIM-SM are multicast routing protocols that provides
scalable inter-domain multicast routing across the Internet, independent of the mechanisms
provided by any particular unicast routing protocol. Only one PIM mode can be operational at
a time.
ipv6 pim dense
This command enables the administrative mode of PIM-DM in the router.
Command example:
(NETGEAR) (Config) #ipv6 pim dense
no ipv6 pim dense
This command disables the administrative mode of PIM-DM in the router.
ipv6 pim sparse
This command enables the administrative mode of PIM-SM in the router.
Command example:
(NETGEAR) (Config) #ipv6 pim sparse
Default
disabled
Format
ipv6 pim dense
Mode
Global Config
Format
no ipv6 pim dense
Mode
Global Config
Default
disabled
Format
ipv6 pim sparse
Mode
Global Config