Netgear M4300-48X (XSM4348CS) - Stackable Switches with Full PoE+ Provisioning ソフトウェアガイド
Switching Commands
484
M4200 and M4300 Series ProSAFE Managed Switches
The following statistics display when the all
keyword is used.
MVRP Commands
mvrp (Global Config)
Use this command in Global Configuration mode to enable MVRP. MVRP must also be
enabled on the individual interfaces.
enabled on the individual interfaces.
Note:
If MVRP is enabled on all devices and STP is disabled, statically
created VLANs are propagated to other devices. Each device ends up
with all the VLANs and connecting ports participating in all the VLANs.
This may cause loops in the network.
created VLANs are propagated to other devices. Each device ends up
with all the VLANs and connecting ports participating in all the VLANs.
This may cause loops in the network.
no mvrp (Global Config)
Use this command in Global Configuration mode to disable MVRP.
MMRP messages transmitted
Total number of MMRP frames that sent
MMRP messages failed to
transmit
transmit
Total number of MMRP frames that failed to be transmitted
Parameter
Description
Intf
The interface associated with the rest of the data in the row.
Rx
Total number of MMRP messages received.
Bad Header
Total number of MMRP frames with bad headers received
Bad Format
Total number of MMRP frames with bad PDUs body formats received
Tx
Total number of MMRP frames that sent
Tx Failed
Total number of MMRP frames that failed to be transmitted
Default
enabled
Format
mvrp
Mode
Global Config
Format
no mvrp
Mode
Global Config
Parameter
Description