Netgear M4300-48X (XSM4348CS) - Stackable Switches with Full PoE+ Provisioning 管理者ガイド
![Netgear](https://files.manualsbrain.com/attachments/cf1ad5de25a3f8d6c88ef0ab489c1b137eebe11f/common/fit/150/50/17742d1e0cdacf24edeb88c30757620088415c5f7699f69b4517262e21e0/brand_logo.jpeg)
DiffServ
257
Managed Switches
Example 1: Enable Protocol-Based Auto VoIP
This example is provided as CLI commands and as a web interface procedure.
CLI: Protocol-Based Auto VoIP
This script in this section shows how to set up Auto VoIP per port.
1.
Enable protocol-based Auto VoIP on a specific port of the switch.
2.
Display the Auto VoIP information.
Web Interface: Configure Protocol-Based Auto VoIP
1.
Enable protocol-based Auto VoIP on a specific port of the switch:
a. Select Switching > Auto-VoIP > Protocol-based > Port Settings.
A screen similar to the following displays.
b. Scroll down and select the interface 2/0/1 check box.
The Interface field in the table heading displays 2/0/1.
c. From the Auto VoIP Mode mode, select Enable.
d. Click Apply.
(Netgear Switch)(Configure)#interface 2/0/1
(Netgear Switch)(Interface 2/0/1)#auto-voip protocol-based
(Netgear Switch) #show auto-voip protocol-based interface 2/0/1
VoIP VLAN Id................................... 2
Prioritization Type............................ traffic-class
Class Value.................................... 6
Interface Auto VoIP Mode Operational Status
--------- -------------- -----------------
2/0/1 Enabled Up