Netgear M4300-48X (XSM4348CS) - Stackable Switches with Full PoE+ Provisioning ソフトウェアガイド
Get Started
18
M4200 and M4300 Series ProSAFE Managed Switches Software Setup Manual
Find the IP Address Configuration Assigned by a DHCP Server
If your network includes a DHCP server, the DHCP server automatically assigns the IP
address configuration to the switch. By default, the switch functions as a DHCP client,
allowing both the management interface and OOB port (which is also referred to as the
service port) to be assigned IP addresses by the DHCP server. The first time that you
connect the switch to the network, the DHCP server configures the switch with the IP
address, subnet, and other information.
address configuration to the switch. By default, the switch functions as a DHCP client,
allowing both the management interface and OOB port (which is also referred to as the
service port) to be assigned IP addresses by the DHCP server. The first time that you
connect the switch to the network, the DHCP server configures the switch with the IP
address, subnet, and other information.
If you want the DHCP server to assign a particular IP address to the switch, for example in an
IP address–to–MAC address binding configuration, you must preconfigure the DHCP server
with the IP address and MAC information for the switch. After you configure the DHCP server,
the first time that you connect the switch to the network, the DHCP server configures the
switch with the IP address, subnet, and other information that you supplied.
IP address–to–MAC address binding configuration, you must preconfigure the DHCP server
with the IP address and MAC information for the switch. After you configure the DHCP server,
the first time that you connect the switch to the network, the DHCP server configures the
switch with the IP address, subnet, and other information that you supplied.
To find the IP address configuration that is assigned by a DHCP server:
1.
Connect a computer with a Windows, MAC, or Linux operating system and a terminal
emulation program or a VT100/ANSI terminal and open the appropriate COM port.
emulation program or a VT100/ANSI terminal and open the appropriate COM port.
When the terminal interface initializes, the user login prompt displays.
2.
Enter your user name and password.
The default admin user name is admin and the default admin password is blank, that is,
do not enter a password.
do not enter a password.
3.
To find the assigned IP addresses, enter the following commands:
•
For the management interface: (management switch) #show ip management
•
For the service port: (management switch) #show serviceport
The active IP address displays.
4.
Use either the management interface IP address or the OOB port IP address to log in to the
switch’s web management interface.
switch’s web management interface.
Access the Web Management Interface When You Know
the IP Address
the IP Address
This procedure describes how to access the web management interface when you already
know the switch IP address for your access method.
know the switch IP address for your access method.
Either connect to an Ethernet network port and use the management interface IP address or
connect to the OOB port and use the OOB port IP address.
connect to the OOB port and use the OOB port IP address.