Netgear M4300-24X (XSM4324CS) - Stackable Switches with Full PoE+ Provisioning ユーザーズマニュアル
Configure System Information
112
M4200 and M4300 Series ProSAFE Managed Switches Web Management User Manual
The updated configuration is sent to the switch. Configuration changes take effect
immediately.
immediately.
The following table describes the PoE Configuration nonconfigurable fields.
Configure PoE Settings
To configure PoE settings:
1.
Launch a web browser.
2.
Enter http://<ipaddress> in the web browser address field.
The login window opens.
3.
Enter the user name and password.
The default admin user name is admin and the default admin password is blank, that is,
do not enter a password.
do not enter a password.
4.
Click the Login button.
The System Information page displays.
5.
Select System > PoE > Advanced > PoE Configuration.
Table 42. PoE Configuration Nonconfigurable Fields
Field
Description
Units
The Current PoE Unit. You can change the PoE Unit by selecting
another unit ID listed here.
another unit ID listed here.
Model
The model of the PoE card.
Host
The PoE host.
Firmware Version
The firmware version of the PoE software component.
Power Status
Indicates the power status.
Total Power (Main AC)
The total power provided by the MAIN AC power source.
Total Power (RPS)
The total power provided by the redundant power source.
Power Source
Current source of system power (Main AC or RPS).
Threshold Power
System can power up one port, if consumed power is less than this
power. Consumed power can be between Nominal & Threshold Power
values. The threshold power value is determined by the configurable
System Usage Threshold percent.
power. Consumed power can be between Nominal & Threshold Power
values. The threshold power value is determined by the configurable
System Usage Threshold percent.
Consumed Power
Total amount of power in watts currently being consumed by connected
PoE devices.
PoE devices.