Netgear M4300-24X (XSM4324CS) - Stackable Switches with Full PoE+ Provisioning ユーザーズマニュアル
Configure Switching Information
183
M4200 and M4300 Series ProSAFE Managed Switches Web Management User Manual
The default admin user name is admin and the default admin password is blank, that is,
do not enter a password.
do not enter a password.
4.
Click the Login button.
The System Information page displays.
5.
Select Switching
> VLAN > Advanced > Protocol Based VLAN Group Membership.
6.
In the Group ID list, select the protocol-based VLAN group ID.
7.
Select port numbers (1, 2, 3, and so on) to select ports to add to this protocol-based VLAN
group.
An interface can belong to only one group for a given protocol. If you already added a
port to a group for IP, you cannot add it to another group that also includes IP, although
you can add it to a new group for IPX.
you can add it to a new group for IPX.
8.
Click the Apply button.
The updated configuration is sent to the switch. Configuration changes take effect
immediately.
immediately.
The following table describes the nonconfigurable information displayed on the page.
Configure an IP Subnet-Based VLAN
IP subnet-to-VLAN mapping is defined by configuring an entry in the IP Subnet to VLAN
table. An entry is specified through a source IP address, network mask, and the desired
VLAN ID. The IP subnet-to-VLAN configurations are shared across all ports of the device.
table. An entry is specified through a source IP address, network mask, and the desired
VLAN ID. The IP subnet-to-VLAN configurations are shared across all ports of the device.
Table 69. Protocol-Based VLAN Group Membership
Field
Description
Group Name
This field identifies the name for the protocol-based VLAN that you
selected. It can be up to 32 alphanumeric characters long, including
blanks.
selected. It can be up to 32 alphanumeric characters long, including
blanks.
Current Members
This button can be click to show the current numbers in the selected
protocol-based VLAN group.
protocol-based VLAN group.