Netgear M4300-24X (XSM4324CS) - Stackable Switches with Full PoE+ Provisioning ユーザーズマニュアル
Routing
330
M4200 and M4300 Series ProSAFE Managed Switches Web Management User Manual
By default, VRRP is disabled.
7.
Select the VRID.
The VRID field is configurable only if you are creating a new virtual router.
The valid values are 1 to 255.
8.
Select the unit/slot/port for the new virtual router from the Interface menu.
9.
In the Primary IP Address field, enter the primary IP address of the virtual router.
10.
From the Mode menu, select the Active or Inactive mode for the new virtual router.
11.
Click the Add button.
The virtual router is added to the switch configuration.
12.
Click the Apply button.
The updated configuration is sent to the switch. Configuration changes take effect
immediately.
immediately.
The following table describes the nonconfigurable data that is displayed.
Configure Advanced VRRP Settings
To configure the advanced VRRP global settings.
1.
Launch a web browser.
2.
Enter http://<ipaddress> in the web browser address field.
The login window opens.
3.
Enter the user name and password.
The default admin user name is admin and the default admin password is blank, that is,
do not enter a password.
do not enter a password.
4.
Click the Login button.
The System Information page displays.
5.
Select Routing > VRRP > Advanced > VRRP Configuration.
Table 123. VRRP Global Configuration
Field
Description
Interface IP Address
Indicates the IP address associated with the selected interface.
State
The current state of the virtual router. Possible values are as follows:
•
Initialize
•
Master
•
Backup