Netgear M4300-24X (XSM4324CS) - Stackable Switches with Full PoE+ Provisioning ユーザーズマニュアル

Use one of the following methods to select an interface:

In the Go To Interface field, enter the interface in the unit/slot/port format and click on 
the Go button.

Next to the Interface column, select the check box for the interface that you want to 
configure.

 - Lists all the policy names from which one can be selected.

This field is not shown for read/write users where the inbound service policy attachment is 
not supported by the platform.

Click the Apply button.

The updated configuration is sent to the switch. Configuration changes take effect 
immediately.

This page displays class-oriented statistical information for the policy, which is specified by 
the interface and direction. The Member Class list is populated on the basis of the specified 
interface and direction and hence the attached policy (if any). Highlighting a member class 
name displays the statistical information for the policy-class instance for the specified 
interface and direction. 



Launch a web browser.

Enter http://<ipaddress> in the web browser address field.

The login window opens.

Enter the user name and password. 

The default admin user name is admin and the default admin password is blank, that is, 
do not enter a password.

Click the Login button. 

The System Information page displays.

Select QoS > DiffServ > Advanced > Service Statistics.

Direction

Shows that the traffic direction of this service interface is In.

Operational Status

Shows the operational status of this service interface, either Up or 
Down.