Netgear M4300-24X (XSM4324CS) - Stackable Switches with Full PoE+ Provisioning ソフトウェアガイド
IPv6 Multicast Commands
1034
M4200 and M4300 Series ProSAFE Managed Switches
IPv6 PIM Commands
This section describes the commands you use to configure Protocol Independent Multicast
-Dense Mode (PIM-DM) and Protocol Independent Multicast - Sparse Mode (PIM-SM) for
IPv6 multicast routing. PIM-DM and PIM-SM are multicast routing protocols that provides
scalable inter-domain multicast routing across the Internet, independent of the mechanisms
provided by any particular unicast routing protocol. Only one PIM mode can be operational at
a time.
-Dense Mode (PIM-DM) and Protocol Independent Multicast - Sparse Mode (PIM-SM) for
IPv6 multicast routing. PIM-DM and PIM-SM are multicast routing protocols that provides
scalable inter-domain multicast routing across the Internet, independent of the mechanisms
provided by any particular unicast routing protocol. Only one PIM mode can be operational at
a time.
ipv6 pim dense
This command enables the administrative mode of PIM-DM in the router.
Command example:
(NETGEAR) (Config) #ipv6 pim dense
no ipv6 pim dense
This command disables the administrative mode of PIM-DM in the router.
ipv6 pim sparse
This command enables the administrative mode of PIM-SM in the router.
Command example:
(NETGEAR) (Config) #ipv6 pim sparse
Default
disabled
Format
ipv6 pim dense
Mode
Global Config
Format
no ipv6 pim dense
Mode
Global Config
Default
disabled
Format
ipv6 pim sparse
Mode
Global Config