Netgear M4300-24X (XSM4324CS) - Stackable Switches with Full PoE+ Provisioning ソフトウェアガイド
Using the Command-Line Interface
11
M4200 and M4300 Series ProSAFE Managed Switches
Command Syntax
A command is one or more words that might be followed by one or more parameters.
Parameters can be required or optional values.
Some commands, such as show network and clear vlan, do not require parameters.
Other commands, such as network parms, require that you supply a value after the
command. You must type the parameter values in a specific order, and optional parameters
follow required parameters. The following example describes the network parms
command syntax:
Other commands, such as network parms, require that you supply a value after the
command. You must type the parameter values in a specific order, and optional parameters
follow required parameters. The following example describes the network parms
command syntax:
•
network parms
is the command name.
•
ipaddr
and netmask are parameters and represent required values that you must enter
after you type the command keywords.
•
[gateway]
is an optional keyword, so you are not required to enter a value in place of
the keyword.
This command line reference manual lists each command by the command name and
provides a brief description of the command. Each command reference also contains the
following information:
provides a brief description of the command. Each command reference also contains the
following information:
•
Format shows the command keywords and the required and optional parameters.
•
Mode identifies the command mode you must be in to access the command.
•
Default shows the default value, if any, of a configurable setting on the device.
The show commands also contain a description of the information that the command shows.
Command Conventions
The parameters for a command might include mandatory values, optional values, or keyword
choices. Parameters are order-dependent. The following table describes the conventions this
document uses to distinguish between value types.
choices. Parameters are order-dependent. The following table describes the conventions this
document uses to distinguish between value types.
Format
network parms ipaddr netmask [gateway]
Table 1. Parameter Conventions
Symbol
Example
Description
italic font
value or [value]
Indicates a variable value. You must replace the
italicized text, which can be placed within curly
brackets or square brackets, with an appropriate
value, which might be a name or number.
italicized text, which can be placed within curly
brackets or square brackets, with an appropriate
value, which might be a name or number.
[ ] square brackets
[keyword]
Indicates an optional parameter.
{ } curly braces
{choice1 | choice2}
Indicates that you must select a parameter from the
list of choices.
list of choices.