Netgear M4300-24X (XSM4324CS) - Stackable Switches with Full PoE+ Provisioning ソフトウェアガイド
Management Commands
171
M4200 and M4300 Series ProSAFE Managed Switches
Example: The following shows example CLI display output for the command.
(NETGEAR Switch) #show openflow table-status openflow13
Flow Table..................................... 60
Flow Table Name................................ Openflow 1.3
Maximum Size................................... 1920
Number of Entries............................. 0
Hardware Entries............................... 0
Software-Only Entries.......................... 0
Waiting for Space Entries...................... 0
Flow Insertion Count........................... 0
Flow Deletion Count............................ 0
Insertion Failure Count........................ 0
Flow Table Description......................... The Openflow 1.3 table matches on the
packet layer-2 header, including DA-MAC, SA-MAC, VLAN, Vlan priority ether type; layer-3
header, including SRC-IP, DST-IP, IP protocol, IP-TOS; layer-4 header, including UDP/TCP
source and dest port, ICMP type, and code; SRC-IPv6, DST_IPv6, IPv6 Flow Label,ECN,
ICMPv6 type and code, source L4 Port for TCP / UDP / SCTP and input port including
physical port and LAG port.
packet layer-2 header, including DA-MAC, SA-MAC, VLAN, Vlan priority ether type; layer-3
header, including SRC-IP, DST-IP, IP protocol, IP-TOS; layer-4 header, including UDP/TCP
source and dest port, ICMP type, and code; SRC-IPv6, DST_IPv6, IPv6 Flow Label,ECN,
ICMPv6 type and code, source L4 Port for TCP / UDP / SCTP and input port including
physical port and LAG port.
Cloud Managed Commands
Cloud managed commands enable you to manage the interaction of the switch with a cloud
management agent.
management agent.
The switch maintains several configuration parameters for a cloud management agent.
These parameters are handled like any other configuration parameters but are not used by
the switch itself. The following table lists these parameters.
These parameters are handled like any other configuration parameters but are not used by
the switch itself. The following table lists these parameters.
Table 9. Parameters for a cloud management agent
Parameter
Description
Range
Default
Mode
Overall administrative mode
for cloud managed
operation.
for cloud managed
operation.
•
0. Disabled
•
1. Enabled
0
Proxy IP Address
The IPv4 or IPv6 address of
a proxy server used to
access the public network.
a proxy server used to
access the public network.
Any valid IPv4 or IPv6 host address.
Address family:
•
0. None
•
1. INET
•
2. INET6
An IP address of 0.0.0.0 with an address
family type of None implies that this
parameter is not set.
parameter is not set.
0.0.0.0
0