Netgear M4300-24X (XSM4324CS) - Stackable Switches with Full PoE+ Provisioning ソフトウェアガイド

0/3    1

0/4    0

0/5    0

0/6    0

0/7    0

0/8    0

Use this command to clear and reset specified port-channel and member flap counters for 
the specified interface. 

Use this command to clear and reset all port-channel and member flap counters for the 
specified interface. 

Port mirroring, which is also known as port monitoring, selects network traffic that you can 
analyze with a network analyzer, such as a SwitchProbe device or other Remote Monitoring 
(RMON) probe.

This command adds a source interface for a port mirroring session that is identified by the 
session-id

 argument (an integer value).

Use the source interface {unit/slot/port | cpu | lag lag-group-id} 
parameters to specify the interface to monitor. You can also configure a VLAN as the source 
for the session (all member ports of that VLAN are monitored).

If an interface is a member of both a VLAN and a LAG, you cannot 
assign the VLAN as a source VLAN for a monitor session. However, if 
an interface is a member of a VLAN and you assign the VLAN as a 
source VLAN for a monitor session, afterwards you can add the 
interface as a member to a LAG.

Format

clear port-channel {lag-intf-num | unit/slot/port} counters

Mode

Privileged EXEC

Format

clear port-channel all counters

Mode

Privileged EXEC