Netgear M4300-24X (XSM4324CS) - Stackable Switches with Full PoE+ Provisioning ソフトウェアガイド
IPv6 Commands
792
M4200 and M4300 Series ProSAFE Managed Switches
Tunnel Interface Commands
The commands in this section describe how to create, delete, and manage tunnel
interfaces.Several different types of tunnels provide functionality to facilitate the transition of
IPv4 networks to IPv6 networks. These tunnels are divided into two classes: configured and
automatic. The distinction is that configured tunnels are explicitly configured with a
destination or endpoint of the tunnel. Automatic tunnels, in contrast, infer the endpoint of the
tunnel from the destination address of packets routed into the tunnel. To assign an IP
address to the tunnel interface, see
interfaces.Several different types of tunnels provide functionality to facilitate the transition of
IPv4 networks to IPv6 networks. These tunnels are divided into two classes: configured and
automatic. The distinction is that configured tunnels are explicitly configured with a
destination or endpoint of the tunnel. Automatic tunnels, in contrast, infer the endpoint of the
tunnel from the destination address of packets routed into the tunnel. To assign an IP
address to the tunnel interface, see
on page 633. To assign an IPv6 address to
the tunnel interface, see
interface tunnel
Use this command to enter the Interface Config mode for a tunnel interface. The
tunnel-id
range is
0 to 7.
no interface tunnel
This command removes the tunnel interface and associated configuration parameters for the
specified tunnel interface.
specified tunnel interface.
tunnel source
This command specifies the source transport address of the tunnel, either explicitly or by
reference to an interface.
reference to an interface.
tunnel destination
This command specifies the destination transport address of the tunnel.
Format
interface tunnel tunnel-id
Mode
Global Config
Format
no interface tunnel tunnel-id
Mode
Global Config
Format
tunnel source {ipv4-address | ethernet unit/slot/port}
Mode
Interface Config
Format
tunnel destination ipv4-address
Mode
Interface Config