Netgear M4300-24X (XSM4324CS) - Stackable Switches with Full PoE+ Provisioning ソフトウェアガイド
Management Commands
92
M4200 and M4300 Series ProSAFE Managed Switches
show loginsession long
This command displays the complete user names of the users currently logged in to the
switch.
switch.
Command example:
(NETGEAR Switch) #show loginsession long
User Name
------------
admin
test1111test1111test1111test1111test1111test1111test1111test1111
User Account Commands
This section describes the commands you use to add, manage, and delete system users.
The switch provides two default users: admin and guest. The admin user can view and
configure system settings, and the guest user can view settings.
The switch provides two default users: admin and guest. The admin user can view and
configure system settings, and the guest user can view settings.
Note:
You cannot delete the admin user. There is only one user allowed with
read/write privileges. You can configure up to five read-only users on the
system.
read/write privileges. You can configure up to five read-only users on the
system.
aaa authentication login
Use this command to set authentication at login. The default and optional list names created
with the command are used with the aaa authentication login command. Create a list
by entering the aaa authentication login list-name method command, where
list-name
with the command are used with the aaa authentication login command. Create a list
by entering the aaa authentication login list-name method command, where
list-name
is any character string used to name this list. The method argument identifies
the list of methods that the authentication algorithm tries, in the given sequence.
Term
Definition
ID
Login Session ID.
User Name
The name the user entered to log on to the system.
Connection From
IP address of the remote client machine or EIA-232 for the serial port connection.
Idle Time
Time this session has been idle.
Session Time
Total time this session has been connected.
Session Type
Shows the type of session, which can be HTTP, HTTPS, telnet, serial, or SSH.
Format
show loginsession long
Mode
Privileged EXEC