Netgear M4300-24X (XSM4324CS) - Stackable Switches with Full PoE+ Provisioning ハードウェアマニュアル
Hardware Overview
15
Managed Stackable Switch Series M4300
The following figure illustrates the back panel of full-width model M4300-24X24F.
Figure 6. Back panel model M4300-24X24F
From left to right, the back panel of model M4300-24X24Fprovides the following
components:
components:
•
Fixed fans for front-to-back air flow
•
Modular bay in which an APS250W power supply unit (PSU) is installed
•
Second modular bay for an optional second PSU
LEDs, M4300 Series Full 10G Models
The following table describes the LEDs on the front panel of the full 10G models.
Table 1. LEDs full 10G models
LED
Designation
Power
•
Solid green . The power module is present, is supplying power to the switch,
and is functioning normally.
and is functioning normally.
•
Solid yellow . The switch is booting.
•
Blinking yellow. The system boot-up failed or another failure occurred.
•
Off . Power is not supplied to the switch.
Note:
Because model M4300-24X24F can support two PSUs, the front panel
provides both a Power 1 LED and Power 2 LED.
Fan
•
Solid green . The fans are functioning normally.
•
Blinking yellow. One or more fans failed.
•
Off . Power is not supplied to the switch. The fans are off.
Stack Master
•
Solid green. The switch is functioning as a master in a stack.
•
Off. The switch is not a member of a stack or is functioning as a slave in a
stack.
stack.
Stack ID
The Stack LED contains segments that can indicate the stack unit number of the
switch.
switch.
•
Solid green indicating a number. The switch is a member of a stack. The LED
displays the stack unit number.
displays the stack unit number.
•
Solid green indicating E. The switch functions in ECO mode with all port LEDs
turned off.
turned off.
•
Off. The switch is not a member of a stack.
PSU1 with AC connector
Bay for PSU2