Netgear FVS318N – Prosafe Wireless N VPN Firewall プリント
Dot11 Mode Configuration Commands
194
ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
dot11 profile wps configure
This command configures Wi-Fi Protected Setup™ (WPS) for as SSID. After you have issued
the dot11 profile wps configure command, you enter the dot11-config [profile-wps]
mode, and then you can configure one keyword and associated parameter or associated
keyword at a time in the order that you prefer.
the dot11 profile wps configure command, you enter the dot11-config [profile-wps]
mode, and then you can configure one keyword and associated parameter or associated
keyword at a time in the order that you prefer.
Step 1
Format
Mode
dot11
Step 2
Format
Mode
dot11-config [profile-wps]
Keyword
Associated Keyword to
Select or Parameter to Type
Select or Parameter to Type
Description
The name of the SSID for which you configure WPS.
Enable
or Disable
Enables or disables WPS.
Y
or N
Enables or disables the push button configuration
(PBC) method.
(PBC) method.
Y
or N
Enables or disables the PIN method. If you enable
the PIN method, you also need to set the
station_pin
the PIN method, you also need to set the
station_pin
keyword and associated parameter.
The pin for the PIN method, if the PIN method is
enabled.
enabled.
Command example:
FVS318N> dot11 profile wps configure
dot11-config[profile-wps]> ap_ssid CompanyWide
dot11-config[profile-wps]> wps_status Enable
dot11-config[profile-wps]> configure_via_pin Y
dot11-config[profile-wps]> station_pin 3719
dot11-config[profile-wps]> save
Related show command:
dot11 profile wps configure
ap_ssid <ssid name>
wps_status {Enable | Disable}
configure_via_pbc {Y | N}
configure_via_pin {N | Y {station_pin <pin>}}
ap_ssid
ssid name
wps_status
configure_via_pbc
configure_via_pin
station_pin
pin