Netgear FVS318N – Prosafe Wireless N VPN Firewall プリント
VPN Mode Configuration Commands
216
ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
vpn ipsec vpnpolicy drop <vpn policy name>
This command terminates an active VPN connection by specifying the name of the VPN
policy.
policy.
Format
Mode
vpn
Related show command:
IPSec VPN Mode Config Commands
vpn ipsec mode_config configure <record name>
This command configures a Mode Config record. After you have issued the vpn ipsec
mode_config configure
mode_config configure
command to specify a record name, you enter the
vpn-config [modeConfig] mode, and then you can configure one keyword and associated
parameter or associated keyword at a time in the order that you prefer.
parameter or associated keyword at a time in the order that you prefer.
Step 1
Format
Mode
vpn
Step 2
Format
first_pool_start_ip <ipaddress>
first_pool_end_ip <ipaddress>
second_pool_start_ip <ipaddress>
second_pool_end_ip <ipaddress>
third_pool_start_ip <ipaddress>
third_pool_end_ip <ipaddress>
wins_server_primary_ip <ipaddress>
wins_server_secondary_ip <ipaddress>
dns_server_primary_ip <ipaddress>
dns_server_secondary_ip <ipaddress>
pfs_key_group {N | Y {dh_group {Group1_768_bit |
Group2_1024_bit | Group5_1536_bit}}}
sa_lifetime_type {Seconds {sa_lifetime <seconds>} | KBytes
{sa_lifetime <KBytes>})
encryption_algorithm {None | DES | 3DES | AES-128 |
AES-192 | AES-256}
integrity_algorithm {MD5 | SHA-1}
local_ip <ipaddress>
local_subnet_mask <subnet mask>
Mode
vpn-config [modeConfig]
vpn ipsec vpnpolicy drop <vpn policy name>
vpn ipsec mode_config configure <record name>