Netgear FVS318N – Prosafe Wireless N VPN Firewall プリント
Overview of the Show Commands
258
ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
Security Settings (Security Mode) Show Commands
Enter the show security ? command at the CLI prompt to display the submodes in the
show security mode. The following table lists the submodes and their commands in
alphabetical order:
show security mode. The following table lists the submodes and their commands in
alphabetical order:
Table 15. Show commands: show security mode
Submode
Command Name
Purpose
address_filter
Display the configuration of the IP/MAC
binding log.
binding log.
Display the IPv4 and IPv6 MAC bindings.
Display the MAC addresses for source
MAC filtering.
MAC filtering.
bandwidth
Display the configured bandwidth profiles.
content_filter
Display the groups for which content
filtering is enabled.
filtering is enabled.
Display the keywords that are blocked.
Display the status of content filtering and
the web components.
the web components.
Display the trusted domains.
firewall
Display whether SIP ALG is enabled.
Display whether the IGMP proxy is
enabled.
enabled.
Display whether jumbo frames are enabled.
Display which WAN and LAN security
checks are enabled for IPv4.
checks are enabled for IPv4.
Display which WAN and LAN security
checks are enabled for IPv6.
checks are enabled for IPv6.
Display which VPN pass-through features
are enabled.
are enabled.
Display the IPv4 DMZ WAN firewall rules.
Display the IPv4 LAN DMZ firewall rules.
Display the IPv4 LAN WAN firewall rules.
Display all IPv6 firewall rules.