Netgear FVS318N – Prosafe Wireless N VPN Firewall プリント

IPv6 Routing Commands

This command configures an IPv6 static route. After you have issued the net routing 
static ipv6 configure 

command to specify the name of the new route, you enter the 

net-config [static-routing-ipv6] mode, and then you can configure one keyword and 
associated parameter or associated keyword at a time in the order that you prefer.

net

net-config [static-routing-ipv6]

 or N 

Specifies whether or not the route is an active route.

The destination IP address.

The IPv6 prefix length (integer). This is a decimal 
value that indicates the number of contiguous, 
higher-order bits of the address that make up the 
network portion of the address.

, LAN, or 

Specifies the physical or virtual network interface 
through which the route is accessible:

•  Dedicated-WAN. The dedicated WAN interface.

•  LAN. A LAN interface.

•  Sit0-WAN1. The 6to4-WAN interface.

The gateway IP address for a route that uses a 6to4 
tunnel. The 6to4_gateway and ipv6_gateway 
keywords are mutually exclusive.

The gateway IP address for a route in an IPv6 to 
IPv6 network. The 6to4_gateway and 
ipv6_gateway

 keywords are mutually exclusive.

The metric (integer) for this route. The number can 
be from 2 to 15.

net routing static ipv6 configure <route name>

active_flag {Y | N}

destination_address <ipv6-address>

prefix <prefix length>

gateway_address {6to4_gateway <ipv6-address> | ipv6_gateway 

   <ipv6-address>}

interface {Dedicated-WAN | LAN | Sit0-WAN1}

metric <number>

destination_address  ipv6-address