Netgear FVS318N – Prosafe Wireless N VPN Firewall 参照マニュアル

Click Apply to save your changes. 

When remote management is enabled, you need to use an SSL connection to access the 
wireless VPN firewall from the Internet. You need to enter https:// (not http://) and type the 
wireless VPN firewall’s WAN IP address and port number in your browser. For example, if the 
wireless VPN firewall’s WAN IP address is 192.168.15.175 and the port number is 443, type 
the following in your browser: https://192.168.15.175:443.

The wireless VPN firewall’s remote login URL is:

https://<IP_address>:<port_number> or 
https://<FullyQualifiedDomainName>:<port_number>

The IP address can be an IPv4 or IPv6 address.

Concerning security, note the following:

For enhanced security, restrict access to as few external IP addresses as practical. For 
instructions about how to restrict administrator access by IP address, see 

309.

Allow Secure HTTP 

Management? 
(continued)

Port Number

Enter the port number through which access is allowed. The default 
port number is 443.

The URL through which you can securely manage over an 

HTTP connection displays below the Port Number field.

Allow Telnet 

Management?

To enable Telnet management, select the Yes radio button. To disable Telnet 
management, select the No radio button, which is the default setting.

Specify the addresses through which access is allowed by selecting one of the 
following radio buttons:

•

Everyone. There are no IP address restrictions.

•

IP address range. Only users who use devices in the specified IP address range 
can manage over a Telnet connection. In the From fields, type the start IP 
address of the range; in the To fields, type the end IP address of the range.

•

Only this PC. Only a user who uses the device with the specified IP address can 
manage over a Telnet connection. Type the IP address in the fields.