Netgear FVS318N – Prosafe Wireless N VPN Firewall 参照マニュアル
IPv4 and IPv6 Internet and Broadband Settings
41
ProSAFE Wireless-N 8-Port Gigabit VPN Firewall FVS318N
Router advertisements include a prefix that identifies the subnet that is associated with
the WAN port. The IP address is formed by combining this prefix and the MAC address of
the WAN port. The IP address is a dynamic address.
the WAN port. The IP address is formed by combining this prefix and the MAC address of
the WAN port. The IP address is a dynamic address.
As an option for stateless address autoconfiguration, the ISP’s stateful DHCPv6 server
can assign a prefix through prefix delegation. The wireless VPN firewall’s own stateless
DHCPv6 server can assign this prefix to its IPv6 LAN clients. For more information about
prefix delegation, see
DHCPv6 server can assign this prefix to its IPv6 LAN clients. For more information about
prefix delegation, see
75.
•
Stateful address autoconfiguration. The wireless VPN firewall obtains an interface
address, configuration information such as DNS server information, and other
parameters from a DHCPv6 server. The IP address is a dynamic address.
address, configuration information such as DNS server information, and other
parameters from a DHCPv6 server. The IP address is a dynamic address.
To automatically configure the WAN port for an IPv6 connection to the Internet:
1.
Select Network Configuration > WAN Settings > Broadband ISP Settings.
2.
In the upper right of the screen, select the IPv6 radio button. The ISP Broadband Settings
screen displays the IPv6 settings:
screen displays the IPv6 settings:
Figure 20.
3.
In the Internet Address section of the screen, from the IPv6 drop-down list, select DHCPv6.
4.
In the DHCPv6 section of the screen, select one of the following radio buttons:
•
Stateless Address Auto Configuration
•
Stateful Address Auto Configuration