Netgear FVS318N – Prosafe Wireless N VPN Firewall 参照マニュアル

Enter the settings as described in the following table:

Click Apply to save your changes and add the new IPv6 address pool to the List of Prefixes 
to Advertise table on the RADVD screen for the LAN.



On the RADVD screen for the LAN (see 

82), click the Edit button in 

the Action column for the advertisement prefix that you want to modify. The Add 

Advertisement Prefix screen displays.

Modify the settings as described in the previous table.

Click Apply to save your settings.

IPv6 Prefix Type

Specify the IPv6 prefix type by making a selection from the drop-down list:

•

6to4. The prefix is for a 6to4 address. You need to complete the SLA ID field and 
Prefix Lifetime field. The other fields are masked out.

•

Global/Local/ISATAP. The prefix is for a global, local, or ISATAP address. This 
needs to be a global prefix or a site-local prefix; it cannot be a link-local prefix. You 
need to complete the IPv6 Prefix field, IPv6 Prefix Length field, and Prefix Lifetime 
field. The SLA ID field is masked out.

SLA ID

Enter the site level aggregation identifier (SLA ID) for the 6to4 address prefix that 
should be included in the advertisement.

IPv6 Prefix

Enter the IPv6 prefix for the wireless VPN firewall’s LAN that should be included in the 
advertisement.

IPv6 Prefix Length

Enter the IPv6 prefix length (typically 64) that should be included in the advertisement.

Prefix Lifetime

The prefix lifetime specifies how long the IP address that was created as a result of the 
router advertisement should remain valid.

Enter the prefix lifetime in seconds that should be included in the advertisement. The 
minimum period is 0 seconds; the maximum period is 65536 seconds.