Netgear FVS318v3 – Cable/DSL ProSafe VPN Firewall with 8-Port Switch 参照マニュアル
ProSafe VPN Firewall FVS318v3 Reference Manual
7-2
Advanced Configuration
v5.0, January 2012
8. If your dynamic DNS provider allows the use of wildcards in resolving your URL, you may
select the Use wildcards check box to activate this feature.
For example, the wildcard feature will cause *.yourhost.dyndns.org to be aliased to the same
IP address as yourhost.dyndns.org
For example, the wildcard feature will cause *.yourhost.dyndns.org to be aliased to the same
IP address as yourhost.dyndns.org
9. Click Apply to save your configuration.
Using the LAN IP Setup Options
The LAN IP Setup menu allows configuration of LAN IP services such as DHCP and RIP. From
the main menu of the browser interface, under Advanced, click on LAN IP Setup to view the
menu shown below.
the main menu of the browser interface, under Advanced, click on LAN IP Setup to view the
menu shown below.
Figure 7-1LAN IP Setup Menu
Configuring LAN TCP/IP Setup Parameters
The firewall is shipped preconfigured to use private IP addresses on the LAN side, and to act as a
DHCP server. The firewall’s default LAN IP configuration is:
DHCP server. The firewall’s default LAN IP configuration is:
Note: If your ISP assigns a private WAN IP address such as 192.168.x.x or 10.x.x.x, the
dynamic DNS service will not work because private addresses will not be routed
on the Internet.
on the Internet.