Netgear FVS318Gv2 – ProSAFE VPN Firewall Series 参照マニュアル
Monitor System Access and Performance
357
NETGEAR ProSAFE VPN Firewall FVS318G v2
4.
Click the Apply button.
Your changes are saved.
How to Send Syslogs over a VPN Tunnel Between Sites
To send syslogs from one site to another over a gateway-to-gateway VPN tunnel:
1.
At Site 1, set up a syslog server that is connected to Gateway 1.
2.
Set up a VPN tunnel between Gateway 1 at Site 1 and Gateway 2 at Site 2.
3.
Change the remote IP address in the VPN policy on Gateway 1 to the WAN IP address of
Gateway 2.
4.
Change the local IP address in the VPN policy on Gateway 2 to the WAN IP address of
Gateway 2.
5.
At Site 2, specify that Gateway 2 sends the syslogs to the syslog server at Site 1.
The following sections describe steps 2 through 4, using the topology that is described in the
following table:
following table:
Enable SysLogs
Do you want
to enable
syslog?
to enable
syslog?
To enable the VPN firewall to send logs to a specified syslog server, select the Yes radio
button. Complete the fields that are shown on the right side of the screen.
button. Complete the fields that are shown on the right side of the screen.
To prevent the logs from being sent, select the No radio button, which is the default setting.
SysLog Server
The IP address or FQDN of the syslog server.
SysLog Severity
All the logs with a severity that is equal to and above the severity
that you specify are logged on the specified syslog server. For
example, if you select LOG_CRITICAL as the severity, the logs
with the severities LOG_CRITICAL, LOG_ALERT, and
LOG_EMERG are logged.
Select the syslog severity from the list:
that you specify are logged on the specified syslog server. For
example, if you select LOG_CRITICAL as the severity, the logs
with the severities LOG_CRITICAL, LOG_ALERT, and
LOG_EMERG are logged.
Select the syslog severity from the list:
•
LOG DEBUG. Debug-level messages.
•
LOG INFO. Informational messages.
•
LOG NOTICE. Normal but significant conditions exist.
•
LOG WARNING. Warning conditions exist.
•
LOG ERROR. Error conditions exist.
•
LOG CRITICAL. Critical conditions exist.
•
LOG ALERT. An action must be taken immediately.
•
LOG EMERG. The VPN firewall is unusable.
Type of Address
Gateway 1 at Site 1 Gateway 2 at Site 2
WAN IP address
10.0.0.1
10.0.0.2
LAN IP address
192.168.10.0
192.168.20.0
Table 79. Firewall Logs & E-mail screen settings (continued)
Setting
Description