Netgear FVS318Gv2 – ProSAFE VPN Firewall Series 参照マニュアル

Enter the settings as described in the following table: 

Do you want to 
enable DMZ Port?

Select one of the following radio buttons:

Yes.  Enables  you  to  configure  the  DMZ  port  settings.  Complete  the  IP 
Address  and  Subnet  Mask  fields.

No.  Allows  you  to  disable  the  DMZ  port  after  you  configure  it.

IP Address

Enter the IP address of the DMZ port. Make sure that the DMZ 
port IP address and LAN port IP address are in different 
subnets (for example, an address outside the LAN DHCP 
address pool, such as 192.168.1.101 when the LAN DHCP 
pool is 192.168.1.2–192.168.1.100). The default IP address for 
the DMZ port 176.16.2.1.

Subnet Mask

Enter the IP subnet mask of the DMZ port. The subnet mask 
specifies the network number portion of an IP address. The 
subnet mask for the DMZ port is 255.255.255.0.

Disable DHCP Server If another device on your network is the DHCP server for the VLAN, or if you intend 

to manually configure the network settings of all of your computers, select the 
Disable DHCP Server radio button to disable the DHCP server. This is the default 
setting.