Netgear GSM7248v2 - ProSAFE 48 Port Layer 2 Gigabit L2 Ethernet Switch ユーザーズマニュアル
Chapter 7. Monitoring the System
|
565
ProSafe® Gigabit L3 Managed Stackable Switches Software Administration Manual
SysLog Configuration
To access the SysLog Configuration page, click Monitoring
Logs > Sys Log Configuration.
1.
Use Admin Status to enable/disable logging to configured syslog hosts. Setting this to
disable stops logging to all syslog hosts. Disable means no messages will be sent to
any collector/relay. Enable means messages will be sent to configured collector/relays
using the values configured for each collector/relay. Enable/Disable the operation of the
syslog function by selecting the corresponding radio button.
disable stops logging to all syslog hosts. Disable means no messages will be sent to
any collector/relay. Enable means messages will be sent to configured collector/relays
using the values configured for each collector/relay. Enable/Disable the operation of the
syslog function by selecting the corresponding radio button.
2.
Use Local UDP Port to specify the port on the local host from which syslog messages are
sent. The default port is 514. Specify the local port in the text field.
sent. The default port is 514. Specify the local port in the text field.
Table
7-115.
Field
Description
Messages Relayed
The count of syslog messages relayed.
Messages Ignored
The count of syslog messages ignored.