Netgear GSM7224v2 - 24-Port Layer 2 Managed Gigabit Switch ユーザーズマニュアル
Chapter 3. Configuring Switching Information
|
143
ProSafe® Gigabit L3 Managed Stackable Switches Software Administration Manual
Port DVLAN Configuration
To display the Port DVLAN Configuration page, click Switching
VLAN
Advanced
Port
DVLAN Configuration.
1.
Use Interface to select the physical interface for which you want to display or configure
data. Select 'All' to set the parameters for all ports to same values.
data. Select 'All' to set the parameters for all ports to same values.
2.
Use Admin Mode to specify the administrative mode via which Double VLAN Tagging can
be enabled or disabled. The default value for this is Disabled.
be enabled or disabled. The default value for this is Disabled.
3.
Use the 2-byte hex Global EtherType as the first 16 bits of the DVlan tag.
•
802.1Q Tag - Commonly used tag representing 0x8100
•
vMAN Tag - Commonly used tag representing 0x88A8
•
Custom Tag - Configure the EtherType in any range from 0 to 65535