Netgear GSM7224v2 - 24-Port Layer 2 Managed Gigabit Switch ユーザーズマニュアル
Chapter 2. Configuring System Information
|
21
ProSafe® Gigabit L3 Managed Stackable Switches Software Administration Manual
The System Information provides various statuses:
Switch Status
To define system information:
1.
Open the System Information page.
2.
Define the following fields:
a. System Name - Enter the name you want to use to identify this switch. You may use
up to 255 alphanumeric characters. The factory default is blank.
b. System Location - Enter the location of this switch. You may use up to 255
alphanumeric characters. The factory default is blank.
c. System
Contact - Enter the contact person for this switch. You may use up to 25
alphanumeric characters. The factory default is blank.
d. Login Timeout - Specify how many minutes of inactivity should occur on a serial
port connection before the switch closes the connection. Enter a number between 0
and 160: the factory default is 5. Entering 0 disables the timeout.
and 160: the factory default is 5. Entering 0 disables the timeout.
3.
Click Apply to send the updated screen to the switch and cause the changes to take effect
on the switch. These changes will not be retained across a power cycle unless a save is
performed.
on the switch. These changes will not be retained across a power cycle unless a save is
performed.