Netgear GSM7224v2 - 24-Port Layer 2 Managed Gigabit Switch ユーザーズマニュアル
44
|
Chapter 2. Configuring System Information
ProSafe® Gigabit L3 Managed Stackable Switches Software Administration Manual
3.
Repeat the previous steps to add additional SNTP servers. You can configure up to three
SNTP servers.
SNTP servers.
4.
To removing an SNTP server, select the check box next to the configured server to remove,
and then click Delete. The entry is removed, and the device is updated.
and then click Delete. The entry is removed, and the device is updated.
5.
To change the settings for an existing SNTP server, select the check box next to the
configured server and enter new values in the available fields, and then click Apply.
Configuration changes take effect immediately.
configured server and enter new values in the available fields, and then click Apply.
Configuration changes take effect immediately.
6.
Click Cancel to cancel the configuration on the screen and reset the data on the screen to
the latest value of the switch.
the latest value of the switch.
7.
Click Refresh to refresh the page with the most current data from the switch.