Netgear FSM726E – ProSAFE 24-Port Fast Ethernet L2 Managed Switch 管理者ガイド
ProSafe 7000 Managed Switch Software Administration Manual, Release 8.0.2
Virtual Router Redundancy Protocol
10-4
v1.0, March 2010
b.
Under IP Interface Configuration, scroll down to interface 1/0/2 and select the checkbox for that
interface. Now 1/0/2 appears in the Interface field at the top.
interface. Now 1/0/2 appears in the Interface field at the top.
c.
Enter the following information in the IP Interface Configuration:
•
In the IP Address field, enter 192.150.2.1.
•
In the Network Mask field, enter 255.255.0.0.
•
Select Enable in the Routing Mode field.
d.
Click Apply to save the settings.
3.
Enable VRRP on the 1/0/2:
a.
From the main menu, select Routing > VRRP > Advanced> VRRP Configuration. A screen similar
to the following displays.
to the following displays.
Figure
10-4
b.
Under Global Configuration, next to the Admin Mode, select Enable radio button.
c.
Enter the following information in the VRRP Configuration:
•
In the VRID(1 to 255) field, enter 20.
•
Select 1/0/2 in the Interface field.
•
In the Primary IP Address, enter 192.150.2.1.
•
Select Active in the Mode field.
d.
Click Apply to save the settings.
Configure VRRP on a Backup Router
The example is shown as CLI commands and as a Web interface procedure.