Netgear M6100 – Campus Edge and SMB Core Chassis Switches ソフトウェアガイド
Configure Switching Information
226
M6100, M5300, and M7100 Series Managed Switches
8.
In the TCP Port field, specify the TCP port for the target that monitors iSCSI traffic.
Up to 16 TCP ports can be defined in the system. The well-known iSCSI ports 860 and
3260 are configured as defaults but you can remove them as any other configured target.
3260 are configured as defaults but you can remove them as any other configured target.
9.
In the IP address field, specify an IP address for the target that monitors iSCSI traffic.
The default is 0.0.0.0.
10.
In the Target Name field, specify a name to assign to the target.
The iSCSI Target Name can be up to 233 characters in length.
11.
Click the Add button.
The iSCSI targets configuration is added.
12.
To delete a selected iSCSI targets configuration, click the Delete button.
View iSCSI Sessions
To view information about active iSCSI sessions:
1.
Prepare your computer with a static IP address in the 169.254.100.0 subnet, for
example, 169.254.100.201.
2.
Connect an Ethernet cable from an Ethernet port on your computer to an Ethernet port on
the switch.
3.
Launch a web browser.
4.
Enter the IP address of the switch in the web browser address field.
The default IP address of the switch is 169.254.100.100.
The Login screen displays.
5.
Enter the user name and password.
The default admin user name is admin and the default admin password is blank, that is,
do not enter a password.
do not enter a password.
6.
Click the Login button.
The web management interface menu displays.
7.
Select Switching > iSCSI > Advanced > Sessions.