Netgear M6100 – Campus Edge and SMB Core Chassis Switches ソフトウェアガイド
Configure Quality of Service
512
M6100, M5300, and M7100 Series Managed Switches
Configure Global CoS Settings
To configure global CoS settings:
1.
Prepare your computer with a static IP address in the 169.254.100.0 subnet, for
example, 169.254.100.201.
2.
Connect an Ethernet cable from an Ethernet port on your computer to an Ethernet port on
the switch.
3.
Launch a web browser.
4.
Enter the IP address of the switch in the web browser address field.
The default IP address of the switch is 169.254.100.100.
The Login screen displays.
5.
Enter the user name and password.
The default admin user name is admin and the default admin password is blank, that is,
do not enter a password.
do not enter a password.
6.
Click the Login button.
The web management interface menu displays.
7.
Select QoS
> CoS > Basic > CoS Configuration.
Note:
You can also navigate to this screen by selecting QoS > CoS >
Advanced > CoS Configuration
Advanced > CoS Configuration
.
8.
Use Global to specify all CoS configurable interfaces.
The option Global represents the most recent global configuration settings.
9.
Use Interface to specify CoS configuration settings based per-interface.
10.
Use Global Trust Mode to specify whether to trust a particular packet marking at ingress.
Global Trust Mode can be one of the following:
•
untrusted
•
trust dot1p
•
trust ip-dscp
The default value is trust dot1p.