Netgear M6100 – Campus Edge and SMB Core Chassis Switches ソフトウェアガイド
Maintenance
714
M6100, M5300, and M7100 Series Managed Switches
2.
Connect an Ethernet cable from an Ethernet port on your computer to an Ethernet port on
the switch.
3.
Launch a web browser.
4.
Enter the IP address of the switch in the web browser address field.
The default IP address of the switch is 169.254.100.100.
The Login screen displays.
5.
Enter the user name and password.
The default admin user name is admin and the default admin password is blank, that is,
do not enter a password.
do not enter a password.
6.
Click the Login button.
The web management interface menu displays.
7.
Select Maintenance > Save Config > Auto Install Configuration.
The Autoinstall State field displays the current status of the Autoinstall process.
8.
Use Auto Install to select the start/stop auto install mode on the switch.
9.
Use AutoInstall Persistent Mode to enable/disable AutoInstall persistent mode.
10.
Use AutoSave Mode to select Enabled or Disabled.
11.
Click the Apply button.
The configuration changes that you made are saved across a system reboot. All changes
submitted since the previous save or system reboot are retained by the switch.
submitted since the previous save or system reboot are retained by the switch.
12.
Use AutoInstall Retry Count to specify the number of times the unicast TFTP tries are
made for the DHCP specified file before falling back for broadcast TFTP tries.
Reboot the Switch
To reboot the switch:
1.
Prepare your computer with a static IP address in the 169.254.100.0 subnet, for
example, 169.254.100.201.