Netgear RD521210 – ReadyDATA 5200 12TB SATA Bundle includes RD5200 with 2 x RD5D6LT01 Disk Packs クイック設定ガイド

Configure the properties as explained in the following table:

Name

The name is provided for information only and cannot be changed.

Target

The target is the address that an iSCSI client (that is, an initiator) needs to access the 
LUN group. The Target field is automatically populated, but you can delete the content 
by clicking the cross at the right of the field and then replace the content with a custom 
target address.

Require initiators to identify 
themselves using CHAP

By default, access to the LUN group is open to the 
initiators that you add to the table onscreen. Select this 
check box to enable CHAP authentication, and to allow 
only authenticated initiators access to the LUN group.

Allowed Initiators

Select the Selected radio button.

Access to the LUN group is granted to iSCSI qualified names (IQNs) only. (If CHAP 

authentication is enabled, access is dependent on CHAP authentication.)

1. Click the + button to the right of the empty table.  

The Create initiator pop-up screen displays:

2. In the Name field, enter an IQN in the format as defined by 

iqn.2012-04.com.netgear:sj-tst-5200:a123b456.

3. Enter a CHAP password with a length of at least 12 characters.

4. Confirm the CHAP password.

5. Click Create.  

The IQN is added to the table on the LUN Group Properties pop-up screen.

6. In the Allowed column of the table, select (that is, flag) the check box to allow the 

initiator access to the LUN group.

Password

Enter a CHAP password with a length of at least 
12

 

characters.

Confirm Password

Confirm the CHAP password.

Click Apply. 

The new LUN group properties take effect immediately.

Password for 
bidirectional CHAP 
authentication

By default, access to an initiator by a LUN in the LUN group is open. To require a LUN 
in the LUN group to be authenticated before accessing an initiator, set a password for 
bidirectional CHAP authentication.