Netgear FSM726v2 – 24-Port 10/100 Mbps Managed Stackable Switch with Gigabit Ports インストールガイド
![Netgear](https://files.manualsbrain.com/attachments/cf1ad5de25a3f8d6c88ef0ab489c1b137eebe11f/common/fit/150/50/17742d1e0cdacf24edeb88c30757620088415c5f7699f69b4517262e21e0/brand_logo.jpeg)
700 Series Software Manual v2.1
4-10
Administration Console Telnet Interface
Enabling auto-negotiation on a port allows a port to sense the communication speed and negotiate
the duplex mode (full duplex or half duplex) automatically. The ports will select the highest
possible throughput. The port can auto-negotiate with any port that is compliant with IEEE 802.3u.
If the other port is not IEEE802.3u compliant, the port will default to half-duplex, 10 Mbps mode.
You can operate the communication speed and duplex mode manually.
the duplex mode (full duplex or half duplex) automatically. The ports will select the highest
possible throughput. The port can auto-negotiate with any port that is compliant with IEEE 802.3u.
If the other port is not IEEE802.3u compliant, the port will default to half-duplex, 10 Mbps mode.
You can operate the communication speed and duplex mode manually.
Flow Control
.
Allows you to enable or disable Flow Control.
Flow control is a protocol that prevents packets from being dropped by reducing the amount of
traffic to a level that can be accommodated. If enabled on both ends of a connection, it will
prevent the sender from sending data until the receiver can accept it. This switch complies with
the IEEE802.3x flow control standard.
traffic to a level that can be accommodated. If enabled on both ends of a connection, it will
prevent the sender from sending data until the receiver can accept it. This switch complies with
the IEEE802.3x flow control standard.
Main Menu> Set-Up> GBIC
This page allows you to choose the port type for the gigabit ports. The default is 1000BASE-T
(RJ-45).
(RJ-45).
Figure 4-13: GBIC Port Configuration
All of the parameters on this page are toggle settings. To change, or toggle, between options, press
Ctrl-M to move the curser to the ports field and simply press the space bar when the appropriate
option is highlighted.
Ctrl-M to move the curser to the ports field and simply press the space bar when the appropriate
option is highlighted.
If you want to use a GBIC, the settings on this page must be set accordingly. The switch
auto-detects if the media is copper or GBIC. This Auto-detect feature is enabled by default.
auto-detects if the media is copper or GBIC. This Auto-detect feature is enabled by default.