Netgear FSM726v2 – 24-Port 10/100 Mbps Managed Stackable Switch with Gigabit Ports インストールガイド

4-16

Administration Console Telnet Interface

The results are reported for the selected port. The test can take up to one minute.

Note: Only the console menu will let you run the virtual cable tester on any port. Other 
management interfaces require port access and therefore cannot reliably test the cable continuity of 
the port they are using to access the switch.

This menu option allows you to configure the advanced security settings of the switch to limit the 
access to the management interfaces. 

There are two advanced security options beyond the basic password protection: RADIUS client 
authentication and IP Filtering.  If you have a RADIUS server on your network, you can have 
authentication of management access done through the RADIUS server.  This does not affect 
traffic passing through the switch, but only authenticates access to the switch management.  The 
same is true for IP Filtering.  Here, you can allow only users with specific IP addresses to access 
the management features, thus preventing unauthorized personnel from configuring to the switch.  

This menu option allows you to configure the 802.1x security settings of the switch to require 
RADIUS authentication to access ports on the switch.