Netgear FSM726v2 – 24-Port 10/100 Mbps Managed Stackable Switch with Gigabit Ports インストールガイド
700 Series Software Manual v2.1
6-4
Command Line Interface
Show DiffServ
Use the show
diffserv
command to view the priority associated with each DSCP value.
Syntax
FSM726# show diffserv
An example of the partial output is shown below.
DSCP Priority
==== ========
0 normal
1 normal
2 normal
3 normal
4 normal
5 normal
6 normal
Show Dot1x
Use the show
dot1x
command to show the authentication server IP, shared secret, and the
Reauthentication Timer value.
Each port is listed with the 802.1x state, which can be forced authorized, forced unauthorized
(deny client to access network), or auto detected. The Reauthentication Timer value specifies the
time interval between the authentication server's checks of users connected to the network. The
default time interval is 3600 seconds.
(deny client to access network), or auto detected. The Reauthentication Timer value specifies the
time interval between the authentication server's checks of users connected to the network. The
default time interval is 3600 seconds.
Show Interfaces
The
show interface
command displays such information as port statistics, duplex, speed, and
other port-related information.
Syntax