Netgear GS716Tv2 - ProSAFE 16-Port Gigabit Managed Switch 管理者ガイド
65
GS716T and GS724T Gigabit Smart Switches
LLDP Port Settings
Use the LLDP Port Settings page to specify LLDP parameters that are applied to a specific
interface.
interface.
To display the LLDP Port Settings page, click System
LLDP
Advanced
LLDP Port
Settings.
To configure LLDP port settings:
1.
Change the LLDP port settings described below:
•
Interface. Specifies the port to be affected by these parameters.
•
Admin Status. Select the status for transmitting and receiving LLDP packets:
•
Tx Only: Enable only transmitting LLDP PDUs on the selected ports.
•
Rx Only: Enable only receiving LLDP PDUs on the selected ports.
•
Tx and Rx: Enable both transmitting and receiving LLDP PDUs on the selected
ports. This is the default value.
ports. This is the default value.
•
Disabled: Do not transmit or receive LLDP PDUs on the selected ports.
•
Management IP Address. Choose whether to advertise the management IP address
from the interface. The possible field values are:
from the interface. The possible field values are:
•
Stop Advertise: Do not advertise the management IP address from the interface.
•
Auto Advertise: Advertise the current IP address of the device as the
management IP address.
management IP address.
•
Notification. When notifications are enabled, LLDP interacts with the Trap Manager
to notify subscribers of remote data change statistics. The default is Disabled.
to notify subscribers of remote data change statistics. The default is Disabled.