Netgear GS510TP – ProSAFE 8-Port Gigabit Smart Switch with PoE and 2 fiber SFP ports 管理者ガイド

Alert (1): The second highest warning level. An alert log is saved if there is a serious 

device malfunction, such as all device features being down. Action must be taken 
immediately.

Critical (2): The third highest warning level. A critical log is saved if a critical device 

malfunction occurs, for example, two device ports are not functioning, while the rest of 
the device ports remain functional. 

Error (3): A device error has occurred, such as if a port is offline. 

Warning (4): The lowest level of a device warning. 

Notice (5): Normal but significant conditions. Provides the network administrators 

with device information. 

Info (6): Provides device information. 

Debug (7): Provides detailed information about the log. Debugging should only be 

entered by qualified support personnel.

If you make any changes to the page, click Apply to apply the change to the system.

The rest of the page displays the number of persistent messages the system has logged and 
the persistent log messages. 

Use the buttons at the bottom of the page to perform the following actions:

Click Clear to clear the messages out of the buffered log.

Click Refresh to refresh the page with the most current data from the switch.

Click Cancel to cancel the configuration on the screen and reset the data on the screen 

to the latest value of the switch.

Server Log Configuration

Use the Server Log Configuration page to allow the switch to send log messages to the 
remote logging hosts configured on the system.

To access the Server Log Configuration page, click the Monitoring > Logs tab, and then 
click the Server Log link.