Netgear GS510TP – ProSAFE 8-Port Gigabit Smart Switch with PoE and 2 fiber SFP ports 管理者ガイド

VLAN ID. Specify the VLAN Identifier for the new VLAN. (You can only enter data in 

this field when you are creating a new VLAN.) The range of the VLAN ID is 1–4093.

VLAN Name. Use this optional field to specify a name for the VLAN. It can be up to 

32 alphanumeric characters long, including blanks. The default is blank. VLAN ID 1 is 
always named Default.

VLAN Type. This field identifies the type of the VLAN you are configuring. You cannot 

change the type of the default VLAN (VLAN ID = 1) because the type is always 
Default. When you create a VLAN on this page, its type will always be Static.

To delete a VLAN, select the check box next to the VLAN ID and click Delete. You cannot 

delete the default VLAN.

To modify settings for a VLAN, select the check box next to the VLAN ID, change the 

desired information, and then click Apply. Configuration changes occur immediately.

Click Cancel to cancel the configuration on the screen and reset the data on the screen to 

the latest value of the switch.

To reset the VLAN settings on the switch to the factory defaults, select the Reset 

Configuration check box, and click OK in the popup message to confirm. If the 

Management VLAN is set to a non-default VLAN (VLAN 1), it is automatically set to 1 after 

a Reset Configuration.

VLAN Membership Configuration

Use this page to configure VLAN Port Membership for a particular VLAN. You can select the 
Group operation through this page.

To display the VLAN Membership Configuration page, click Switching

> VLAN > Advanced > 

VLAN Membership. 

To configure VLAN membership:

From the VLAN ID field, select the VLAN to which you want to add ports.

Click the orange bar below the VLAN Type field to display the physical ports on the switch.

Click the lower orange bar to display the LAGs on the switch.