Netgear GS510TP – ProSAFE 8-Port Gigabit Smart Switch with PoE and 2 fiber SFP ports 管理者ガイド
![Netgear](https://files.manualsbrain.com/attachments/cf1ad5de25a3f8d6c88ef0ab489c1b137eebe11f/common/fit/150/50/17742d1e0cdacf24edeb88c30757620088415c5f7699f69b4517262e21e0/brand_logo.jpeg)
Configuring Switching Information
92
GS510TP and GS110T Gigabit Smart Switches
The following table describes the Rapid STP Status information displayed on the screen.
Field
Description
Interface
The physical or port channel interfaces associated with VLANs associated with the CST.
Role
Each MST Bridge Port that is enabled is assigned a Port Role for each spanning tree.
The port role will be one of the following values: Root Port, Designated Port, Alternate
Port, Backup Port, Master Port, or Disabled Port.
The port role will be one of the following values: Root Port, Designated Port, Alternate
Port, Backup Port, Master Port, or Disabled Port.
Mode
Specifies the spanning tree operation mode. Different modes are STP, RSTP, and MSTP.
Fast Link
Indicates whether the port is enabled as an edge port.
Status
The Forwarding State of this port.
Click Refresh to update the information on the screen with the most current data.
MST Configuration
Use the Spanning Tree MST Configuration page to configure Multiple Spanning Tree (MST)
on the switch.
on the switch.
To display the Spanning Tree MST Configuration page, click Switching > STP > Advanced >
MST Configuration.
MST Configuration.
By default, no MST instances are configured. The following image shows a switch that has
been configured with one MST instance.
been configured with one MST instance.