Netgear GS716Tv3 – ProSAFE 16-Port Gigabit Managed Switch 管理者ガイド
Getting Started
27
GS716Tv3, GS724Tv4, and GS748Tv5 Smart Switches
Interface Naming Convention
The switch supports physical and logical interfaces. Interfaces are identified by their type and
the interface number. All the physical ports are as follows:
the interface number. All the physical ports are as follows:
•
GS716Tv3. Ports 1–16 are gigabit copper ports, and Port 17–18 are dedicated gigabit
SFP ports·
SFP ports·
•
GS724Tv4. Ports 1–24 are gigabit copper ports, and Port 25–26 are dedicated gigabit
SFP ports·
SFP ports·
•
GS748Tv5. Ports 1–46 are gigabit copper ports, Port 47–48 are combo ports that can be
used as gigabit copper or SFP ports, and Ports 47–48 are dedicated gigabit SFP ports·
used as gigabit copper or SFP ports, and Ports 47–48 are dedicated gigabit SFP ports·
The number of the port is identified on the front panel. You can configure the logical
interfaces by using the software. The following table describes the naming convention for all
interfaces available on the switch.
interfaces by using the software. The following table describes the naming convention for all
interfaces available on the switch.
Table 3. Interface naming conventions
Interface
Description
Example
Physical
The physical ports include gigabit ports and are numbered
sequentially starting from one.
sequentially starting from one.
g1, g2, g3
Link aggregation group (LAG)
LAG interfaces are logical interfaces that are only used for
bridging functions.
bridging functions.
l1, l2, l3
CPU management interface
This is the internal switch interface responsible for the
switch base MAC address. This interface is not
configurable and is always listed in the MAC Address
Table.
switch base MAC address. This interface is not
configurable and is always listed in the MAC Address
Table.
c1