Netgear GS716Tv3 – ProSAFE 16-Port Gigabit Managed Switch 管理者ガイド

Use the LLDP Port Settings screen to specify per-interface LLDP settings.



Select System 

>

>

>

 LLDP Port Settings.

Select one or more ports to configure.

To configure a single port, select the check box associated with it, or type the port 
number in the Go To Interface field and click the Go button. 

To configure multiple ports with the same settings, select the check box associated 
with each port to configure. 

To configure all ports with the same settings, select the check box in the heading row.

Admin Status. Select the status for transmitting and receiving LLDP packets:

Tx Only. Enable only transmitting LLDP PDUs on the selected ports.

Rx Only. Enable only receiving LLDP PDUs on the selected ports.

Tx and Rx. Enable both transmitting and receiving LLDP PDUs on the selected 

ports.

Disabled. Do not transmit or receive LLDP PDUs on the selected ports.

Management IP Address. Choose whether to advertise the management IP address 
from the interface. The possible field values are:

Stop Advertise. Do not advertise the management IP address from the interface.

Auto Advertise. Advertise the current IP address of the device as the 

management IP address.

Notification. When notifications are enabled, LLDP interacts with the trap manager to 
notify subscribers of remote data change statistics. The default is Disabled.

Optional TLV(s). Enable or disable the transmission of optional type-length value 
(TLV) information from the interface. The TLV information includes the system name, 
system description, system capabilities, and port description. For information about 
how to configure the system name, see 

on page 36. For information 

about how to configure the port description, see 

on page 81.

Click the Apply button.