Netgear FS752TS – ProSAFE 48 Port 10/100 Stackable Smart Switch with 4 Gigabit Ports インストールガイド
FS700TS Smart Switch Software Administration Manual
Configuring Switching Settings
4-13
v1.0, September 2007
3. Click APPLY to update the device.
LACP Port Priority
To configure LACP port priority:
1. Click Switching > LAG > Advanced > LACP Port Configuration. The LACP Port Priority
screen displays
The LACP Port Priority screen contains the following fields:
•
Interface – Displays the interface number to which timeout and priority values are
assigned.
assigned.
•
LACP Priority – Enter the port priority value. The field range is 1-65535.
•
Timeout – Select the administrative LACP timeout. The possible field values are:
–
Long – A long timeout value.
–
Short – A short timeout value.
2. Select the interface.
3. Enter the LACP Priority and select the Timeout in the provided fields in the first row.
4. Click APPLY to update the device.
Figure 4-9