Netgear M4100-D12G (GSM5212v1h1) - 10‐port GE + 2 GE Combo L2 Managed PD Switch ソフトウェアガイド
Using the Command-Line Interface
11
M4100 Series ProSAFE
Managed
Switches
command without the keyword no to reenable a disabled feature or to enable a feature that
is disabled by default. Only the configuration commands are available in the no form.
is disabled by default. Only the configuration commands are available in the no form.
Managed Switch Modules
Managed switch software consists of flexible modules that can be applied in various
combinations to develop advanced Layer 2/3/4+ products. The commands and command
modes available on your switch depend on the installed modules. Additionally, for some
show
combinations to develop advanced Layer 2/3/4+ products. The commands and command
modes available on your switch depend on the installed modules. Additionally, for some
show
commands, the output fields might change based on the modules included in the
software.
The software suite includes the following modules:
•
Switching (Layer 2)
•
Routing (Layer 3)
•
Quality of Service
•
Management (CLI, web UI, and SNMP)
Command Modes
The CLI groups commands into modes according to the command function. Each of the
command modes supports specific software commands. The commands in one mode are
not available until you switch to that particular mode, except for the User EXEC mode
commands. You can execute the User EXEC mode commands in the Privileged EXEC
mode.
command modes supports specific software commands. The commands in one mode are
not available until you switch to that particular mode, except for the User EXEC mode
commands. You can execute the User EXEC mode commands in the Privileged EXEC
mode.
The command prompt changes in each command mode to help you identify the current
mode. The following table describes the command modes and the prompts visible in that
mode.
mode. The following table describes the command modes and the prompts visible in that
mode.
Note:
The command modes available on your switch depend on the software
modules that are installed. For example, a switch that does not support
BGPv4 does not provide the Router BGPv4 Command Mode.
modules that are installed. For example, a switch that does not support
BGPv4 does not provide the Router BGPv4 Command Mode.
Table 5. CLI Command Modes
Command Mode
Prompt
Mode Description
User EXEC
Switch>
Contains a limited set of commands to view
basic system information.
basic system information.
Privileged EXEC
Switch#
Allows you to issue any EXEC command,
enter the VLAN mode, or enter the Global
Configuration mode.
Configuration mode.