Netgear M4100-D12G (GSM5212v1h1) - 10‐port GE + 2 GE Combo L2 Managed PD Switch ソフトウェアガイド
Green Ethernet Commands
524
M4100 Series ProSAFE
Managed
Switches
Energy Efficient Ethernet (EEE)
Energy Efficient Ethernet (EEE) combines MAC with ports that support operation in a
Low-Power Mode. This feature is defined by the IEEE 802.3az Energy Efficient Ethernet
Task Force. Lower Power Mode enables both send and receive sides of a link to disable
some port functionality to save power when the port is lightly loaded. Transition to Low-Power
Mode does not change the link status. Frames in transit are not dropped or corrupted during
transition to and from Low-Power Mode. This transition time is transparent to upper layer
protocols and applications.
Low-Power Mode. This feature is defined by the IEEE 802.3az Energy Efficient Ethernet
Task Force. Lower Power Mode enables both send and receive sides of a link to disable
some port functionality to save power when the port is lightly loaded. Transition to Low-Power
Mode does not change the link status. Frames in transit are not dropped or corrupted during
transition to and from Low-Power Mode. This transition time is transparent to upper layer
protocols and applications.
EEE operation is subject to the following conditions:
•
Autonegotiation must be enabled to use any of the EEE modes. EEE mode is disabled
automatically when autonegotiation is disabled.
•
Enabling or Disabling EEE mode causes the port link to flap once as EEE capability
needs to be advertised. This restarts autonegotiation.
needs to be advertised. This restarts autonegotiation.
•
EEE must be disabled while running hardware or software cable diagnostics.
•
Combo (Combination) ports: Combo ports support both copper and fiber media. EEE
mode only applies to copper media. If Energy Detect mode is configured on a
combination port, it will only function when a copper media is active. EEE LPI statistics
are only collected if a copper media is used on the port. If the media on a port changes
from copper to fiber while EEE is enabled, LPI statistics collection stops until the media
changes back to copper. The outputs of the show green-mode <slot/port> and
show green-mode eee-lpi-history interface
mode only applies to copper media. If Energy Detect mode is configured on a
combination port, it will only function when a copper media is active. EEE LPI statistics
are only collected if a copper media is used on the port. If the media on a port changes
from copper to fiber while EEE is enabled, LPI statistics collection stops until the media
changes back to copper. The outputs of the show green-mode <slot/port> and
show green-mode eee-lpi-history interface
<slot/port> commands
display updated LPI statistics only if the medium is copper.
Green Ethernet Commands
green-mode energy-detect
Use this command enables energy-detect mode on an interface or on all the interfaces.
•
Interface Config
•
Interface Range Config
no green-mode energy-detect
This command disables energy-detect mode on an interface or on all the interfaces.
•
Interface Config
•
Interface Range Config
Default
Disabled
Format
green-mode energy-detect
Mode
Format
no green-mode energy-detect
Mode