Netgear M4300-28G (GSM4328S) - Stackable Managed Switch with 24x1G and 4x10G including 2x10GBASE-T and 2xSFP+ Layer 3 管理者ガイド

Create two protocol VLAN groups. One is for IPX and the other is for IP/ARP. The untagged 
IPX packets are assigned to VLAN 4, and the untagged IP/ARP packets are assigned to 
VLAN 5.

Create a VLAN protocol group vlan_ipx based on IPX protocol.

Create a VLAN protocol group vlan_ipx based on IP/ARP protocol.

Assign VLAN protocol group 1 to VLAN 4. 

Assign VLAN protocol group 2 to VLAN 5.

Enable protocol VLAN group 1 and 2 on the interface.

(Netgear Switch)#config

(Netgear Switch)(Config)#vlan protocol group 1

(Netgear Switch)(Config)#vlan protocol group name 1 "vlan_ipx"

(Netgear Switch)(Config)#vlan protocol group add protocol 1 ethertype ipx

(Netgear Switch)(Config)#vlan protocol group 2

(Netgear Switch)(Config)#vlan protocol group name 2 "vlan_ip"

(Netgear Switch)(Config)#vlan protocol group add protocol 2 ethertype ip

(Netgear Switch)(Config)#vlan protocol group add protocol 2 ethertype arp

(Netgear Switch)(Config)#exit

(Netgear Switch)#vlan database

(Netgear Switch)(Vlan)#vlan 4

(Netgear Switch)(Vlan)#vlan 5

(Netgear Switch)(Vlan)#protocol group 1 4

(Netgear Switch)(Vlan)#protocol group 2 5

(Netgear Switch)(Vlan)#exit

(Netgear Switch)#config

(Netgear Switch)(Config)#interface 1/0/11

(Netgear Switch)(Interface 1/0/11)#protocol vlan group 1

(Netgear Switch)(Interface 1/0/11)#protocol vlan group 2

(Netgear Switch)(Interface 1/0/11)#exit