Netgear M4300-28G (GSM4328S) - Stackable Managed Switch with 24x1G and 4x10G including 2x10GBASE-T and 2xSFP+ Layer 3 管理者ガイド
Syslog
429
Managed Switches
Web Interface: Show Logging Hosts
Select Monitoring > Logs > Sys Log Configuration. A screen similar to the following
displays.
displays.
Configure Logging for a Port
The example is shown as CLI commands and as a web interface procedure.
CLI: Configure Logging for the Port
(Netgear Switch) #config
(Netgear Switch) (Config)#logging ?
buffered
Buffered (In-Memory) Logging Configuration.
cli-command
CLI Command Logging Configuration.
console
Console Logging Configuration.
host
Enter IP Address for Logging Host
syslog Syslog Configuration.
(Netgear Switch) (Config)#logging host ?
<hostaddress>
Enter Logging Host IP Address
reconfigure
Logging Host Reconfiguration
remove Logging Host Removal
(Netgear Switch) (Config)#logging host 192.168.21.253 ?
<cr> Press Enter to execute the command.
<port> Enter Port Id