Netgear M4300-28G (GSM4328S) - Stackable Managed Switch with 24x1G and 4x10G including 2x10GBASE-T and 2xSFP+ Layer 3 管理者ガイド
Switch Stacks
440
Managed Switches
Stack Switches Using a 10G Copper Port
This example shows how to stack two switches at close range.
Figure 48. Connect switches through their 10G copper ports
To set up a stack between two switches:
1.
Using a Cat6e Ethernet cable, connect a 10G copper port on one switch with a 10G copper
port on the other switch.
port on the other switch.
2.
Configure the Switch A and Switch B as described in one of the following sections:
•
•
2/0/28
1/0/28
Switch A
Switch B